Filter
Top Products
6.2 Realtek F/W Configuration:
Step-1 Launch the utility of “ ”DebugTool_V6.2.exe
Step-3Select ISP type: Serial Flash
Select ISP icon.
Step-4 Follow up the red square indication
Select P-flash and Auto
Connect VGA
cable between
monitor and kit
Connect USB
and VGA
cable between
PC and kit
Step-2 Select “USB”
If it shows “No USB Device”, there is a problems with
communication .you should confirm your USB device
whether be detected by your PC device management or
reconnect the USB cable again.
6.1 Hardware Configuration
35
Go to cover page
6. Firmware Upgrade Process
ACER H233H