Filter
Top Products
S3 Choose "WRITE" from menu then select "Scan S/N
And Write EDID And Test DDC”
S4 Key in series number in the input column and input 2
column
Press write button after key in S/N
S5 When EDID was written successfully that will show below
message on the screen
Entering Factory mole to let “EDID WP” be off
Writing EDID procedure
S1 Choose the folder “X233H-H233H-HDMI”
Double click “ AcerHDMI_RLT “
The writing process same as writing VGA and DVI
process.
Hardware Configuration:(Writing EDID for )
1. Connect the PRINTER PLUG of DDC FIXTURE with the
printer port of Desktop PC.
2. Plug USB A PLUG of DDC FIXTURE to USB socket of
Desktop PC
3 Use DVI transfer HDMI cable connect between of the DVI
EXTENDING SOCKET and Monitor(Writing EDID for HDMI
port)
4 Take a video cable then connect the D-SUB PLUG and the
D-sub socket of monitor.
5. Re-confirm all the connectors are connected well.
HDMI port’s
PARALLELCONNECTION
USB CONNECTION
VGA CONNECTION
HDMI TRANSFER DVI CONNECTION
Go to cover page
38
7. Writing EDID Process (continued)
ACER H233H