Filter
Top Products
PC 6170 User’s Manual
Hard Disk Boot Priority
This item can select boot device priority.
Virus Warning
This
option flashes
on
the screen. During and after the
system boot
up,
any attempt
to
write
to
the boot
sector or
partition
table of the hard disk
drive will halt the system with the following message.
You can run an
anti-virus
program
to
locate
the
problem.
The
default
setting
is
“
Disabled
”
.
! WARNING !
Disk
boot sector is to be
modified
Type “Y” to accept write or “N” to
abort write
Award Software, Inc.
Enabled
Activates automatically when the system boots up
causing a
warning
message to
appear when there is
an
attempt
to access
the boot
sector
or hard disk partition
table.
Disabled
No
warning message will appear
when
attempts to
access
the
boot sector or
hard disk
partition
table
are
made.
NOTE:
This function is
only
available
with DOS
and
other
operating systems
that do not
trap
INT13.
CPU
L1 & L2
Cache
These two options speed up memory access. However, it
depends on the
CPU/chipset design. The default setting is
“
Enabled
”
.
CPUs with no
built-in internal cache
will not provide the
“
CPU Internal
Cache
”
item on
the menu.
Enabled
Enable cache
Disabled
Disable cache
Quick Power
On Self
Test
This
option speeds
up Power on Self Test
(POST) after
you turn on
the
system power. If set as Enabled, BIOS
will
shorten or
skip some check
items during POST.
The
default setting is
“
Enabled
”
.
Enabled
Enable Quick
POST
Disabled
Norm
al POST
SBC83810 BIOS
Setup
41