Filter
Top Products
PC 6170 User’s Manual
1/2/4/6/8/10/20/
30/40 Min/1
Hr
HDD Power
Down
Defines the
continuous idle time before
the
system entering SUSPEND mode.
If any item defi
ned in
(J) i
s enabled
&
active,
S
USPEND
timer will be reloaded
After the
selected period of
drive inactivity (1
to
15 minutes), the hard
disk drive powers
down
while all other devices
remain active.
The default
value is
“
Disabled
”
.
Disabled
HDD’s motor
will not power
OFF.
1/2/3/4/5/6/7/8/
9/10/11/12/13/1
4/15 Min
Throttle Duty Cy
cle
Defines the
continuous HDD
idle time
before
the
HDD enters power saving mode (motor OFF)
When the system
enters
Doze mode, the CPU clock
runs
only part of
the
time.
You may select
the
percent
of
time that the clock runs.
The default
value is
“
62.5%
”
.
VGA Active Monitor
When Enabled, any
video activity restarts the global timer for
Standby
mode. The default
value
is
“
Enabled
”
.
Soft-Off by
PWR-BTTN
This option
only
works with
systems using
an
ATX power supply.
It also
allows the user to define which type of soft power OFF sequence the
system will follow. The default value is
“
Instant-Off
”
.
Instant-Off
Delay 4 Sec.
Power
On by Ring
This
option follows
the conventional manner
system
s
perform when
power is turned OFF.
Instant-Off i
s a soft
power OFF sequence requiring onl
y the switching of
the
power
supply button to OFF
Upon turning
OFF system from
the power switch,
this
option will
delay
the complete
system
power
OFF
sequence by approximatel
y 4
seconds.
Within this
delay period,
system
will temporarily
enter into
Suspend M
ode
enabling
you to restart the system
at
once.
This option allows the system
to
resume
or
wake up upon
detecting
any
ring
signals
coming
from
an
installed
modem.
The
default
value
is
“
Enabled
”
.
IRQ 8
Break Suspend
You
can turn on or off monitoring of IRQ8 (the Real Time Clock) so
it
SBC83810 BIOS
Setup
55