Filter
Top Products
PC 6170 User’s
Manual
Video Off
After
As the system
moves
from lesser to greater power-saving
modes, select
the mode
in which you want the monitor to
blank
off.
The default value is
“
Standby
”
.
NA
System BIOS
will never turn off the screen
Suspend
Screen
off when
system
is in SUS
PEND mode
Standby
Screen
off when
system
is in STANDB
Y mode
Doze
Screen
off when
system
is in DOZE mode
NO
T
E
:
Gre
en
mon
itor
s de
te
ct
t
h
e V/H SYNC si
gnal
s to
turn of
f it
s el
ectr
on
gun
Modem Use IRQ
3, 4, 5, 7, 9,
10, 11, NA
Doze Mode
For
external
modem,
3
or 4 will be used for
card
type
modem
. It
is up to
card
definition. Default is
3.
After the selected period
of system
inactivity (1 minute to 1 hour), the
CPU clock runs at
slower speed while all other devices still
operate
at full
speed. The default
value
is
“
Disabled
”
.
Disabled
System will
never enter doze
mode
1/2/4/6/8/10/20/30/4
0 Min/1 Hr
Standby Mode
Defines
the continuous idle
ti
me before
the
system entering DOZE m
ode.
After the
selected period
of system
inactivity (1
minute to 1 hour), the
fixed disk drive and
the
video
shut off while
all other
devices still
operate
at full speed. The default
value
is
“
Disabled
”
.
Disabled
System
will never enter STANDBY
mode
Defines the
continuous idle time before
the
1/2/4/6/8/10/20/
30/40 Min/1
Hr
Suspend Mode
system entering STANDB
Y mode.
If any item defi
ned in
(J) i
s enabled
&
active,
S
TANDBY timer will be
reloaded
After the selected period of
system inactivity (1 minute to 1 hour), all
devices
except
the
CPU shut off.
The default value is
“
Disabled
”
.
Disabled
System
will never enter SUSPEND mode
54
SBC83810 BIOS Setup