Filter
Top Products
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PCH 5120
12.1” industrial Panel PC
IP67 rated fully enclosure
ƒ Type: Indicates the type of devices a user can manually select
ƒ Vendor: Lists the device manufacturer
ƒ Size: List the storage capacity of the device.
ƒ LBA Mode: Indicates whether the LBA (Logical Block Addressing) is a method of addressing data
on a disk drive is supported or not.
ƒ Block Mode: Block mode boosts IDE drive performance by increasing the amount of data trans
ferred. Only 512 bytes of data can be transferred per interrupt if block mode is not used. Block
mode allows transfers of up to 64 KB per interrupt.
ƒ PIO Mode: Indicates the PIO mode of the installed device.
ƒ Async DMA: Indicates the highest Asynchronous DMA Mode that is supported.
ƒ Ultra DMA: Indicates the highest Synchronous DMA Mode that is supported.
ƒ S.M.A.R.T.: Indicates whether or not the Self-Monitoring Analysis and Reporting Technology protocol
is supported.
ƒ 32Bit Data Transfer: Enables 32-bit data transfer.
ƒ Type [Auto]
Use the Type BIOS option select the type of device the AMIBIOS attempts to boot from after the Power-On
Self-Test (POST) is complete.
Not Installed BIOS is prevented from searching for an IDE disk drive on the specified channel.
Auto DEFAULT The BIOS auto detects the IDE disk drive type attached to the specified channel.
This setting should be used if an IDE hard disk drive is attached to thespecified
channel.
CD/DVD The CD/DVD option specifies that an IDE CD-ROMdrive is attached to the specified
IDE channel. The BIOS does not attempt to search for other types of IDE disk drives
on the specified channel.
ARMD This option specifies an ATAPI Removable Media Device. These include, but are
not limited to: ZIP/ LS-120