Filter
Top Products
17
7-2. Self Check Function with Response Adjustment
This function automatically updates the response adjustment by analyzing the influence of
the environment on the weighing data and also self-checks the balance performance using
the internal mass.
Step 1 Press and hold the MODE key until RESPONSE is
displayed, and then release the key.
Step 2 The balance automatically starts to check the balance
performance and sets the response characteristic.
Caution
Do not allow vibration or drafts to affect the
balance during adjustment.
Step 3 After automatic adjustment, the balance displays the updated
response indicator and returns to the weighing mode.
The response indicator remains displayed for a while.
Example of display
MID. and OK : The example above indicates that the result of the self check
is good and MID. is selected as the response rate..
Note
If improper performance is found in the self check, the balance displays CH no .
Contact the local A&D dealer for repair.
If the automatic response adjustment fails, the balance displays CH ng . Check the
ambient conditions such as breeze and vibration, also check the weighing pan. Then,
perform the adjustment again. To return to the weighing mode, press the CAL key.
CH . . . .
CH
0. 000
g
Resul
t
Press and hold
Release