Filter
Top Products
29
Class Item and Parameter Description
0
OFF
Cp-b
Main display comparison
1
ON
Displays the results on the main
portion of the display in place of the
weight value.
0
OFF
bep
LO buzzer
1
ON
Select whether or not to sound the
LO buzzer.
0
OFF
bep
OK buzzer
1
ON
Select whether or not to sound the
OK buzzer.
0
OFF
Cp fnc
Comparator
bep
HI buzzer
1
ON
Select whether or not to sound the
HI buzzer.
Cp Hi
Upper limit
Cp lo
Lower limit
Refer to the GX-K manual
"10-8. Comparator Function"
Displayed when
Cp in 0
is selected.
Cp ref
Reference value
Cp lmt
Tolerance
Refer to the GX-K manual
"10-8. Comparator Function"
Displayed when
Cp in 1
is selected.
0
Key mode
Accepts the PRINT key only when
the display is stable.
1
Auto print mode A
(Reference = zero)
2
Auto print mode B
(Reference = last stable value)
Outputs data when the display is
stable and conditions of
ap-p
,
ap-b
and the reference value are met.
prt
Data output mode
3
Stream mode /
Interval memory mode
With
data 0
, outputs data
continuously; with
data 2
, uses
interval memory.
0
Plus only
Displayed value>Reference
1
Minus only
Displayed value<Reference
ap-p
Auto print polarity
2
Both
Regardless of displayed value
0
10 digits
1
100 digits
ap-b
Auto print difference
2
1000 digits
Difference between reference value
and displayed value
0
Not used
1
Stores unit mass in counting mode
2
Stores weighing data
3
Stores calibration data
4
Stores comparator settings
data
Data memory
5
Stores tare value
Related items:
prt,
int
,
d-no
,
5-td
,
info
0
Every measurement
1
2 seconds
2
5 seconds
3
10 seconds
4
30 seconds
5
1 minute
6
2 minute
7
5 minute
dout
Data output
int
Interval time
8
10 minute
Interval time in the interval memory
mode when using
prt 3, data 2
Displayed
only when
Comparator
output
(GX-04K) is
installed
:
Factory settings. Digit is a unit of minimum weighing value.