Filter
Top Products
ADCP-90-216
Issue 2, January 1998
Page 14
1998, ADC Telecommunications, Inc.
6.07
Coil the service loop clockwise (if the fiber entry is from the right) or counter-clockwise
(if the fiber entry is from the left), around the radius limiters in the splice drawer. Avoid twisting
the service loop when coiling around the radius limiters.
6.08
Place the splice tray in the center of the drawer and push the drawer into the chassis.
6.09
Record the cable fiber identification on the designation label attached to the front cover.
6.10
Repeat steps 6.02 through 6.09 for additional splice trays as required.
7. SYSTEM INTEGRATION SERVICES
7.01
ADC offers the following system integration services. For calls originating in the U.S.A.
or Canada, dial
1-800-366-3891
,
extension 3000
. For calls originating outside the U.S.A. or
Canada, dial
612-946-3000
.
Technical Assistance Center
• Product Management
• Project Engineering
• Project Administration
• Network Design
• Broadband Design (RF Design and Strand Mapping)
• Integration Network Testing
• Network Monitoring (Upstream or Downstream)
• Power Monitoring
• Remote Surveillance
• System Turn-Up and Test
• Service/Maintenance Agreements
Technical Training
• Product Technology
• Custom Designed Training
Technical Operations
• Detail Engineering
• End-to-End Installation
• Drafting Services