Filter
Top Products
47
USB Country Code
Some computers query the keyboard to find
out its country code and key layout. These
computers use this information to configure
the way that they interpret the data coming
from the keyboard and so it is important for
the correct country information to be supplied.
Not all keyboards report country information
and two different styles of keyboard may be
connected to the AdderView CATx 1000.
Default Country
The codes that may be used within this option are as follows:
Country Code Country Code
Arabic 01 Persian (Farsi) 20
Belgian 02 Poland 21
Canadian-Bilingual 03 Portugese 22
Canadian-French 04 Russian 23
Czech Republic 05 Slovakian 24
Danish 06 Spanish 25
Finnish 07 Swedish 26
French 08 Swiss/French 27
German 09 Swiss/German 28
Greek 10 Switzerland 29
Hebrew 11 Taiwan 30
Hungary 12 Turkish-Q 31
International (ISO) 13 UK 32
Italian 14 US 33
Japan (Katakana) 15 Yugoslavia 34
Korean 16 Turkish-F 35
Latin American 17 Reserved 36-255
Netherlands 18 Not supported 00
Norwegian 19
ADDERVIEW CATx 1000
USB Country Code
Country Code AUTO
Default Country 32
Space-Toggle
-Up -Down Esc-Quit
Country Code
Settings: AUTO, MANUAL, DISABLED
In AUTO mode the AdderView CATx 1000 will attempt to query the keyboard
attached to the local port to ascertain a country code. If a country code is not
found then the AdderView CATx 1000 will use the current value of the Default
Country option. In MANUAL mode, the connected local keyboard is not queried
for country information and instead the Default Country value is reported to
all computers that request country information. In DISABLED mode, no country
information is supplied to computers requesting country information.
To get here
1 From a local or remote keyboard, log on
as a standard (limited options) or ‘admin’
user.
2 Press
(hotkeys can change).
3 Press to select ‘More menus’.
4 Press again to select ‘Advanced
menus’.
5 Highlight the USB Country Code option
and press Enter.
6 Select ‘Setup Options’.