Filter
Top Products
SmartView Multiscreen Installation and Use Page 20
Type of mouse / system Driver type Likely expected Suggested
Connected at bootup data format restoration
PS/2 PS/2 only PS/2 F5
PS/2 IntelliMouse PS/2 F5
IntelliMouse / SmartView MS PS/2 only PS/2 F5
IntelliMouse / SmartView MS IntelliMouse IntelliMouse F6
To restore lost mouse movement on a CPU connected to the SmartView
Multiscreen:
1) Select the CPU that has lost its mouse movement
2) Press the select key on the front of the SmartView Multiscreen for 5 seconds until
‘C’ is displayed. You are now in configure mode.
3) To restore a PS/2 mouse connection press
F 5F 5
ff
Or, to restore an IntelliMouse connection press
F 6F 6
ff
4) Exit from configure mode by typing
E E
ff
5) Test the mouse movement by moving the mouse a short distance.
F5 - Restore PS/2 mouse function
F6 - Restore IntelliMouse function
2.12 Upgrading the SmartView's flash memory
The SmartView Multiscreen uses flash memory technology which enables the
firmware code to be upgraded by the user. Upgrades are performed by connecting a
PC's serial port to the SmartView's options port and running an upgrade program on
the PC. This upgrade program downloads the new firmware to the SmartView and
checks that the data has been programmed correctly.