Filter
Top Products
Addlogix Wireless PC2TV InternetVue 2100 Version 0.2
23
What WiFi configuration is necessary to use the Wireless PC2TV InternetVue 2100?
On the computer, check the WiFi configuration to ensure that the wireless radio is enabled
and set to Infrastructure mode.
Each Wireless PC2TV InternetVue 2100 must have a unique SSID. Identical SSIDs on more
than one unit will cause unpredictable application behavior. The application may not connect
to the desired Wireless PC2TV InternetVue 2100 if more than one has the same SSID. Each
Wireless PC2TV InternetVue 2100 is configured with a default SSID embedded in the
firmware that cannot be changed. However, through the Wireless PC2TV InternetVue 2100
application, a new SSID can be assigned to the device.
When the Wireless PC2TV InternetVue 2100 application is launched, it disables the WZC
utility and uses Windows NDISUIO to scan for Wireless PC2TV InternetVue 2100s. Some
laptop wireless adapter vendors may provide proprietary NDIS utilities and corporate IT
departments may use third-party NDIS utilities that may interfere or block Windows
NDISUIO functionality.
When the application cannot locate APs through the NDISUIO API, it generates a message
to the user. The user needs to manually connect to the Wireless PC2TV InternetVue 2100
prior to launching the application. Refer to your computer user guide for connection
instructions for third-party wireless NDIS module for configuration and management utility.
The Wireless PC2TV InternetVue 2100 application does not connect to the Wireless
PC2TV InternetVue 2100
Check to see if the wireless LAN is activated on the computer. If so, attempt to connect to the
device manually via the computer’s wireless utility.
The Wireless PC2TV InternetVue 2100 that is powered on does not appear on the list of
available wireless networks
The Windows wireless driver may not update its list of available access points. To correct this:
1. Exit the Wireless PC2TV InternetVue 2100 application (if launched).
2. Open the Microsoft WZC utility (or third-party utility that is controlling the wireless access
function) and view available wireless networks.
3. Press the Refresh button to update the list of available APs (it may be necessary to refresh
once more if the Wireless PC2TV InternetVue 2100 does not appear in the available AP list).
If the Wireless PC2TV InternetVue 2100 still does not appear in the available list, a fresh start is
recommended by using the following steps:
Exit the Wireless PC2TV InternetVue 2100 application (if launched).
Disable the wireless adapter from Windows "Network and Dialup Connections" dialog box.
Enable the wireless adapter again.
Open the WZC window and view available wireless networks to ensure that the Wireless
PC2TV InternetVue 2100 is available.
Re-launch the Wireless PC2TV InternetVue 2100 application.
Cannot connect to the Internet while projecting
If your computer is not projecting to the television or projector, make sure that:
A wireless connection to the Wireless PC2TV InternetVue 2100 is established.