Filter
Top Products
SNFS
Resolving Installation Problems 7-25
Step 4 If you want to change file system parameters and global settings, edit and save the
/usr/cvfs/config/file_system_name.cfg file.
Step 5 Run the StorNext FS initialize utility. Enter: cvmkfs file_system_name
Step 6 Reinitialize the specific StorNext FS by following the online instructions.
Step 7 Start the file system using the File System Administrator utility.
a. Start cvadmin. Enter: cvadmin
Several status messages display.
b. Start the file system. Enter: start file_system_name
c. Activate the file system. Enter: activate file_system_name
d. Select the file system. Enter: select file_system_name
File system configuration status displays.
e. Exit cvadmin. Enter: quit
Step 8 Mount StorNext FS. Enter: mount mount_directory
If the configuration status does not display or if the file system does not start, check the var/adm/
messages for errors and check file_system_name.cfg for syntactic or typographical errors.
CAUTION
This step cannot be undone and all data on the file system will be lost,
so make sure you are ready to initialize the file system before you
proceed.