Filter
Top Products
SNFS
4-10 6-00905-01 Rev A
Examples of stripe groups appear in the configuration file.
• Find the stripe group named RegularFiles.
• Edit the Node entries so that all the disk names are listed, with each entry followed by
a space and then the stripe order number (0, 1, 2, etc.).
For example:
Step 3 Save, name and exit the /usr/cvfs/config/<file_system_name>.cfg file.
Step 4 Enable and start the StorNext File System. Enter:
# chkconfig cvfs on
# /etc/init.d/cvfs start
For more information, refer to the cvfs man page.
NOTE
Make sure you have a <file_system_name>.cfg file for each uniquely named
StorNext File System on the StorNext FS server.
[StripeGroup RegularFiles]
Status UP
Type Regular
Read Enabled
Write Enabled
StripeBreadth 64
Node CvfsDisk0 0
Node CvfsDisk1 1
Node CvfsDisk2 2
Node CvfsDisk3 3