Filter
Top Products
SNFS
5-8 6-00905-01 Rev A
Step 12 Edit the /boot/grub/menu.lst file so the kernel can be booted. Make edits to reflect
the new kernel configuration parameters.
file /boot/grub/menu.lst before changes:
title linux
kernel (hd1,0)/boot/vmlinuz root=/dev/sdb1 vga=791
initrd (hd1,0)/boot/initrd
title floppy
root (fd0)
chainloader +1
file /boot/grub/menu.lst after changes (in bold):
title linux-suse
kernel (hd1,0)/boot/vmlinuz-suse root=/dev/sdb1 vga=791
initrd (hd1,0)/boot/initrd-suse
title floppy
root (fd0)
chainloader +1
Step 13 Verify that pdksh is installed.
Multiple LUN Support
If your file system storage device user non-zero SCSI Logical Unit Numbers (LUNs), configure the
RedHat Linux kernel to scan for all SCSI LUNs. By default, RedHat Linux only scans for LUN 0.
To configure the Linux kernel for multiple LUNs:
Step 1 In the /etc/modules.conf file, add the following line:
options scsi_mod max_scsi_luns=luns=nLUNs
where the nLUNs value equals the number of LUNs that are required by your file system
storage device.