Filter
Top Products
SNFS
6-6 6-00905-01 Rev A
Step 4 Edit /usr/cvfs/config/cvlabels so that it contains a list of StorNext FS label names
that correspond to the device names of the drives captured in Step 2.
You can create any convention for the label names. For example, if a site consists of
12 Fibre Channel drives, you can use CvfsDisk[n] for each label name. Replace [n]
with a decimal number starting at 0 and increment the number for each drive. In this case,
the label name entries in the file would be: CvfsDisk0, CvfsDisk1, CvfsDisk2, and
so on. For example:
Step 5 After the cvlabels file is complete, label the disk drives using the cvlabel command.
# cd /usr/cvfs/bin
# ./cvlabel
Follow the on-screen instructions for labeling the disk drives.
# Solaris Example
# Drives 0 through 11 will be used for Regular Stripe
Groups, # so the entire volumes are used (total sector
sizes are used # since optional sector sizes are not
specified).
#
# Regular file disks - use entire volume
CvfsDisk0 [device_name0]
CvfsDisk1 [device_name1]
CvfsDisk2 [device_name2]
CvfsDisk3 [device_name3]
CvfsDisk4 [device_name4]
CvfsDisk5 [device_name5]
CvfsDisk6 [device_name6]
CvfsDisk7 [device_name7]
CvfsDisk8 [device_name8]
CvfsDisk9 [device_name9]
CvfsDisk10 [device_name10]
CvfsDisk11 [device_name11]