Filter
Top Products
Introduction 7
The following illustration shows the layout of the LCD. The normal on-line message (LdR REAdY) is displayed on the top
line. On-line, off-line, and error messages appear on this line.
DC indicates that data compression is selected on the drive.
WP indicates that a write-protected data cartridge is loaded into the drive.
CT indicates that the drive head needs to be cleaned.
The large numeric field in the center of the display normally indicates which cartridge is loaded into the drive. Whenever an
error occurs an E will appear in this field and the error message will appear on line 1 of the display (see chapter 4 for
descriptions of the possible error messages).
The Activity Bars on the right side of the display, in conjunction with the Activity LED, indicate robotic and drive activity. A
blinking bottom bar is displayed when no activity is taking place. A slow interval between the bars appearing/disappearing
indicates robotic activity, and a fast interval indicates drive activity.
The seven numeric fields at the bottom of the display indicate the current cartridge inventory. Each will appear only if a
cartridge is present in the appropriate storage slot.
L r rea y
DC
WP
CT
5
1 2 3 4 5 6 7
Operator Panel LCD