Filter
Top Products
Troubleshooting and Diagnostics 35
iag menu
2 3 4 5 6 7
The following functions are available under the dIAG MENU:
dSP FW
When executed, this function displays the revision of the operating firmware used by FastStor
microprocessors and the drive.
SIGN ON
Use this function if your application software does not support FastStor, but does support the
SCALAR library.
CHG MOdE
Use this function to change the Mode of Operation from/to RANDOM or SEQUENTIAL.
CYCLE TEST
This function allows you to verify the functionality of the FastStor robotics. CYCLE TEST
exercises the FastStor robotics by executing a sequence of pick and place operations, moving the
cartridges between the slots and the drive.
CLEAN dRV
The CLEAN DRV function permits you to clean the drive head manually. Use this function if
your application software does not support an auto cleaning cycle, and you do not want to
dedicate slot 7 to the FastStor AUTOCLEAN feature.
AUTOCLEAN
AUTOCLEAN provides an automatic cleaning cycle. Use AUTOCLEAN only if your
application software does not support an auto cleaning cycle. Slot 7 is dedicated to the cleaning
cartridge whenever AUTOCLEAN is enabled, reducing the FastStor data capacity to 6 tapes.
LOAd FW
When executed, this function allows you to upgrade the FastStor formware via the SCSI bus.
dSP COUNTS
FastStor keeps track of how many times certain events have occurred. The dSP COUNTS
function returns these numbers to the display.
UPG dRV FW
This function allows you to upgrade the drive firmware using a FUP tape.
DISPLAY FIRMWARE
❐ After entering the dIAG MENU, press the MODE button to access the dSP FW function. The LCD will appear as shown:
sp fw
2 3 4 5 6 7
❐ Press the SELECT button to access the dSP LdR FW sub-function. The LCD will appear as shown:
sp l r fw