ADIC FCR 200 Network Router User Manual


 
2-4 Description
62-9301-01
FCR200 Features
Fibre Channel Features
Fibre Channel initiator and target modes
Single 1.0625 Gbps port
Fibre Channel Arbitrated Loop (FC-AL) and Switched
Fabric (FC-SW) topologies
Private Loop Direct Attach (PLDA) profile compliant
Class 3 connection with SCSI-FCP protocol
Optical GBIC
FC-Tape Compliant
SCSI Bus Features
SCSI initiator and target modes
Two auto-negotiating SCSI buses (Narrow, Wide, Fast,
Ultra)
Ultra Wide SCSI for data transfer up to 40 MB/s per bus
Connection for up to 30 devices (15 per bus)
Simultaneous commands, tagged command queuing and
disconnect/reconnect
Middle of bus configuration with external termination
SCSI-2 and SCSI-3 protocols
68-pin D shell, P type connectors
Differential or single-ended
Disk, tape, optical and changer devices
SCC, Indexed and Automatic addressing modes
Configuration Features
Serial RJ-11 connector for terminal access
Ethernet RJ-45 connector for FTP, Telnet and Web
browser access
Easy field-upgradable firmware
Management Features
Out-of-band Ethernet TCP/IP
SNMP with private MIB support