Filter
Top Products
Display Trace and Assertion History 6-17
Display Trace and Assertion History
This option allows for internal trace state information to be
dumped to the serial port and captured. This is useful to
debug installation issues, and can be provided to the service
representative for failure analysis. Further information on
using this interface can be located in the troubleshooting
section of this manual.
Reboot
The reboot function restarts the FCR200. This will cause
selected configuration options to take effect.
This will result in all current operations being interrupted.
Do not reboot the unit during normal operation.
Trace Dump Menu
Version: X.X.XXXX
1) Display Trace for Current Boot Cycle
2) Display Trace for Previous Boot Cycle
3) Display Trace for Last Assertion Failure
4) Display History of Assertion Failures
5) Clear Current Trace Buffer
X) Return to previous menu