Filter
Top Products
4-1
March 31, 1999
4 Operation
In the normal case the host sends the commands to the AML/J. The
AMU is used by the operator for control purposes. The operator is
responsible for the following tasks:
• Starting the AML/J
• Stopping the AML/J
• Handling the cartridges
You will find information on handling the cartridges under Inserting car-
tridges on page 6-4 and Ejecting cartridges on page 6-5. In the case of
equipment disturbances the operator can process the cartridges.
4.1 Switches on the control cabinet
You will find several switches for switching the components on and off
in the control cabinet. In addition to the switches on the front of the con-
trol unit, a mains switch is located on the back of the control unit.
Figure 4-1: Control unit on page 4-1 shows a view of the front side of the
control unit.
Figure 4-1: Control unit
The switches on the control unit are described in Table 4-1: .
Main switch (S3)
"Control on" button
(only for HICAP)