Filter
Top Products
5-20 Menus and commands
DOC D00 025-A
5.6.2 Manual Operation
Prerequisite: "MANUAL" operating mode
Manual execution of the host commands of
and by the oper-
ator.
Step 1 Switch the main switch off
Step 2 In the case of
commands, mount the cartridge in the
stated drive
Step 3 Confirm the execution of the displayed command with
The executed task is acknowledged to the host computer and this
shows the next command
Step 4 On resumption of the automatic mode, perform an insertion
operation for all cartridges used in the manual mode
.
Figure 5-18: "Manual Operation" window
Command/
field
Explanation
Command of the host which should be performed by
the operator
Search in for the Volser or VSN to execute the
command