Filter
Top Products
Chapter 7. Creating a Dial Plan
61200226L1-1 ATLAS 800
PLUS
User Manual
7-5
For User Termination, there is one PRI, one RBS T1, and three BRIs
(see Table 7-2 on page 7-5).
Implement the Dial Plan
1. Using the terminal menus, navigate to the Dial Plan menu.
2. Select the Global Parameter submenu. Select the Area Code option and enter
the area code. Press Enter when you’re done.
3. Navigate to the Dial Plan submenu and select Network Term (Terminations).
4. For PRI A, select Slot 0/Port 1. Select PRI under Sig to define to ATLAS the
interface type to be PRI.
Table 7-2. User Termination
NAME PORT INCOMING
ACCEPT #
OUTGOING
REJECT #
OTHER
BRI D,E,F Octal BRI
Slot 1, Port 4-5,6
888-1001 (D);
888-1002 (E);
888-1003 (F)
Blank - No called
number will be
rejected.
BRI type:
5ESS SPID # to match Video
Equipment provisioning.
Phone numbers:
888-1001 (D);
888-1002 (E);
888-1003 (F)
Phone numbers must match
phone numbers provisioned in
video equipment.
PRI-B Controller T1
Slot 0, Port 2
888-1010
Forms a hunt
group.
Blank - No called
number will be
rejected.
PRI type:
5ESS
Must match RAS equipment.
DID=none
T1-A Slot 2, Port 1 821-8XXX
Accepts all
calls
beginning with
821-8.
1-900-$
Rejects all calls
beginning with
1-900.
RBS 1st DS0=1; #DS0 = 24
Signalling = E&M wink
DID = Enable/# of digits = 4