Filter
Top Products
Chapter 4. Front Panel Operation and Menu Structure
4-4
ATLAS
_800
PLUS
User Manual 61200226L1-1
Status Menu
The Status menu branch lets you view the status of the ATLAS_800
PLUS
Base
Unit and any installed modules.
S0 System
The S0) System option displays status options that are available for the
ATLAS_800
PLUS
Base Unit. Choose from Ethernet (see “Ethernet Status” on page
4-4) or Chain Port (see “Chain Port Status” on page 4-4).
Ethernet Status
This read-only option shows the status of the 10BaseT Ethernet connection
port. The following port status options display in the LCD window. An aster-
isk (*) indicates activity for the item.
Chain Port Status
This read-only option indicates the status of the Chain Port. The following
port status options display in the LCD window. An asterisk (*) indicates activ-
ity for the item.
S1 through S8 (modules)
Select options S1 through S8 to display the current status of installed modules. S1
corresponds to slot 1, S2 to slot 2, and so on. When you select one of these options,
an expanded description of the card status displays. The status types include
ON
(Online),
OFF
(Offline),
NRSP
(No Response),
NRDY
(Not Ready), and
RST
(Restarting).
Port status ... Means that...
TX Data is being transmitted from the 10BaseT
port on the system controller.
RX Data is being received on the 10BaseT port.
LNK Indicates the current status of the 10BaseT link
integrity test (should always be on when the
unit is connected to a functional 10BaseT hub).
Port status... Means that...
RTS Request to send.
CTS Clear To send.
DTR Data terminal ready.
DCD Data carrier detect.