Filter
Top Products
Configuring the IPR-S1000
15
3) With the «down» arrow, select «115. Polarization», and enter that
menu by pressing the «right» arrow.
Example:
Note: Vert./RHCP/14v stands for «Vertical / Right Hand Circular
Polarization» and Horiz/LHCP/18v stands for «Horizontal / Left Hand
Circular Polarization»
4) With the «+» or «-» key, select a polarization type.
5) Confirm the selection by pressing the «down» arrow.
116. Modulation
The process, or result of the process, of varying a characteristic of a
carrier, in accordance with an information-bearing signal.
This screen allows you to select a type of modulation.
1) In the «1. Set config» menu, select «11. DVB».
2) Enter that menu by pressing the «right» arrow.
3) With the «down» arrow, select «116. Modulation», and enter that
menu by pressing the «right» arrow.
Example:
Note: QPSK is the only available modulation on the IPR-S1000
4) With the «+» or «-» key, select a type of modulation.
5) Confirm the selection by pressing the «down» arrow.
117. LNB Power
This screen allows you to enable or disable LNB Power.
1) In the «1. Set config» menu, select «11. DVB».
2) Enter that menu by pressing the «right» arrow.
Polarization:
Vert./RHCP/14v
Horiz./LHCP/18v
Modulation:
QPSK
8 PSK
16 QAM