Filter
Top Products
Configuring the IPR-S1000
29
- Locked/Unlocked signal
- Signal to noise ratio (5.5 dB)
- Viterbi Bit Error Rate (1.3 E - 02)
32. LAN connection
This screen allows you to test the IP connection by using the ping
program.
33. MPE stats
This screen displays the selected MPE PID and the total bit rate in
Kbits/s and in IP packets/s. The screen is updated every second.
34. Uncor. packets
This screen displays the number of packets that could not be corrected
by the demodulator.
35. Temperature
This screen displays the current highest temperature point to be found
in the IPR-S1000.
4. Reboot
The following screen allows you to restart the IPR-S1000.
Note: The current profile will be lost if it is not previously saved.
Example:
Unlock 5.5 dB
VBER: 1.3 E - 02
IP address to ping:
000.000.000.000
1002 (0x3ea)...:
0Kbits/s 0P/s
Uncor. packets: 54
Reset: ?
Temperature:
35.3 C
Really reboot?
? Cancel ? Ok