Filter
Top Products
Configuring the IPR-S1000
16
3) With the «down» arrow, select «117. LNB Power», and enter that
menu by pressing the «right» arrow.
Example:
4) With the «+» or «-» key, decide to enable or disable LNB Power.
5) Confirm the selection by pressing the «down» arrow.
118. DVB IP address
This screen allows you to set the DVB IP address.
1) In the «1. Set config» menu, select «11. DVB».
2) Enter that menu by pressing the «right» arrow.
3) With the «down» arrow, select «118. DVB IP address», and enter
that menu by pressing the «right» arrow.
Example:
4) Enter the DVB IP address
5) Confirm the value by pressing the «down» arrow.
119. Start MPE
This screen allows you to start up the new MPE PID reception.
1) In the «1. Set config» menu, select «11. DVB».
2) Enter that menu by pressing the «right» arrow.
3) With the «down» arrow, select «119. Start MPE», and enter that
menu by pressing the «right» arrow.
Example:
4) Enter a value using the same method that you used to set the IP
address.
5) Confirm the value by pressing the «down» arrow.
11A. Stop MPE
This screen allows you to stop the reception of a MPE PID.
LNB Power:
On
Off
DVB IP address:
172.022.000.051/24
Start MPE PID: 0032
1002 (0x3ea)...