Filter
Top Products
Chapter 3. Operation
61200.076L2-1 TSU 600 User Manual 65
Operation
The operation of DS0 Map A and Map B is identical.
With the cursor on 5)DS0 MAP A, press Enter or
number 5. The unit displays the first two DS0 Map A
submenu items with the cursor on 1)COPY A> TEMP.
DS0 Map A and Map B Menu Items
The menu items are:
COPY A >TEMP
This copies the current map (A or B) into a TEMP map
area. This permits modification without disturbing
the existing map. When the modifications are com-
pleted the TEMP map is written to current MAP A (B)
by selecting Apply.
CREATE TEMP
This creates a map by defining a port or Idle for all
DS0s. Any or all of the DS0s can also be designated
for Passthru if a secondary interface capable of
Passthru is present. When 2)CREATE TEMP is
selected, all DS0s are set to Idle, and those in use are
set to the proper port.
A sample selection follows:
DS0: 01 to 24
PASSTHRU: Y for Yes
N for No
PORT: IDLE, TST, + option module ports
TST is used to designate which DS0s are used for QRSS
testing when activated under the 4)TEST Menu. When not
used for testing, the TST designation is identical to IDLE.
With the cursor on 2)CREATE TEMP, press Enter. The
unit displays the selection screen with the cursor
positioned on the first selection DS0 number. See
Figure 3-16.