Filter
Top Products
46 MIC-3318 User's Manual
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select Enabled to activate each channel
separately. The settings are: Enabled (Default) and Disabled.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO
mode (0-4) for each of the four IDE devices that the onboard IDE
interface supports. Modes 0 through 4 provide successively increased
performance. In Auto mode, the system automatically determines the
best mode for each device. The settings are: Auto (Default), Mode 0,
Mode 1, Mode 2, Mode 3, Mode 4.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver
(Windows 95 OSR2 or a third-party IDE bus master driver). If your hard
drive and your system software both support Ultra DMA/33 and Ultra
DMA/66 and Ultra DMA/100, select Auto to enable BIOS support. The
settings are: Auto (Default), Disabled.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB)
1.1 controller. The settings are: Enabled (Default), Disabled.
USB 2.0 Controller
Select Enabled if your system contains a Universal Serial Bus (USB)
1.1/2.0 controller. The settings are: Enabled (Default), Disabled.
USB Keyboard/Mouse Support
Select Enabled if you use USB KB/Mouse in DOS mode. Disabled
(Default)