Filter
Top Products
50 MIC-3318 User's Manual
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup if
you have installed a new add-on and the system reconfiguration has
caused such a serious conflict that the operating system cannot boot.
The settings are: Enabled and Disabled (Default).
Resource Controlled By
The Award Plug and Play BIOS has the capacity to automatically
configure all of the boot and Plug and Play compatible devices.
However, this capability means absolutely nothing unless you are
using a Plug and Play operating system such as Windows® 95/98. If
you set this field to "manual" choose specific resources by going into
each of the sub menus that follow this field (a sub menu is preceded
by a "y"). The settings are: Auto (ESCD) (Default), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt
a type, depending on the type of device using the interrupt.
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled
(Default).