Advantech MIC-3368 Laptop User Manual


 
MIC-3368 Series User Manual -- Page
17
3.1 Introduction
The MIC-3368 has two on-board high-performance fast Ethernet interfaces which
comply with IEEE 802.3/802.3u for 10Base-T and 100 Base-TX data rates.
The module uses two Intel®
82559 fast Ethernet controllers with integrated PHY
and is compatible with the Intel®
PRO/100+ Server and Client Adapter. The dual
Ethernet channel design provides several options for increasing throughput and
fault tolerance when running Windows NT 4.0 or NetWare 4.1x and newer versions
of these, includes:
• Adapter Fault Tolerance (AFT) - provides automatic redundancy for your Ethernet
channel. If the primary channel fails, the secondary takes over.
• Adaptive Load Balancing (ALB) - creates a team of 2 channels to increase
transmission throughput. Also includes AFT and ALB. This function works with any
100BASE-TX switch.
• Fast EtherChannel (FEC) - creates a team of 2 to 4 channels to increase
transmission and reception throughput. Also includes AFT. This function requires a
Cisco switch with FEC capability. The MIC-3368 comes with drivers for a wide
variety of networks and operating systems. The MIC-3368 is an excellent choice for
operation in standalone and harsh industrial environments.
3.2 Utility and Drivers
The MIC-3368's on-board Ethernet interface supports all major network operating
systems. The installation instructions and drivers for different operating systems
are located in the following directories of the utility CD-ROM disc:
General Information:
\MIC3368\LAN\README.TXT: General information about the drivers.
For Microsoft Windows:
\MIC3368\LAN\INFO\MS\MS.TXT: Installation instructions for Microsoft
Windows
\MIC3368\LAN\E100BNT.SYS (NDIS 4.0), \MIC3368\LAN\
OEMSETUP.INF: Drivers for Windows NT 4.0
\MIC3368\LAN\E100B.SYS (NDIS 3), \MIC3368\LAN\
OEMSETUP.INF: Drivers for Windows NT 3.51
\MIC3368\LAN\NET82557.INF: Drivers for Windows 98
\MIC3368\LAN\E100BNT.SYS (NDIS 4.0),
\MIC3368\LAN\NET82557.INF: Drivers for Windows 95
MIC3368\LAN\WFW\E100B.38_, \MIC3368\LAN\WFW\OEMSETUP.INF:
Drivers for Windows 3.1