Filter
Top Products
MIC-3368 Series User Manual -- Page
29
Note: If you enable the IDE HDD block mode, the enhanced IDE driver will be
enabled.
5.1.8 Load Setup Defaults
"LOAD SETUP DEFAULTS" loads the values required by the system for maximum
performance.
5.1.9 Password Setting
To change, confirm, or disable the password, choose the "PASS-WORD SETTING"
option form the Setup main menu and press [Enter]. The password can be at most
8 characters long. Remember, to enable this feature. You must first select the
Security Option in the BIOS FEATURES SETUP to be either "Setup" or "System."
Pressing [Enter] again without typing any characters can disable the password
setting function.
5.1.10 IDE HDD Auto Detection
"IDE HDD AUTO DETECTION" automatically self-detects the hard disk type.
5.1.11 Save & Exit Setup
If you select this and press the [Enter] key, the values entered in the setup utilities
will be recorded in the CMOS memory of the chipset. The microprocessor will check
this every time you turn your system on and compare this to what it finds as it
checks the system. This record is required for the system to operate.
5.1.12 Exit Without Saving
Selecting this option and pressing the [Enter] key lets you exit the Setup program
without recording any new values or changing old ones.