AEG PROTECT 1.100 Power Supply User Manual


 
39
i
Please shut down the entire system again if you
cannot solve a problem that occurs. To do this,
press the OFF pushbutton for approx. 2 seconds.
Disconnect the UPS from the mains by actuating
the mains input miniature circuit breaker (no. 2,
p. 27/28). Please contact our hotline (see p. 5).
21. When the displays are correctly lit as described,
switch on your loads one after the other. When
doing this, take care not to exceed the maximum
permitted load capacity of the UPS.
6.1 Operating Modes
The following operating modes are distinguished:
Operation with mains supply (6.1.1)
Operation with faulty mains supply (6.1.2)
Operation with faulty inverter (6.1.3)
Manual bypass (6.1.4)
6.1.1 Normal Operation
Batterie
Lade GR
GR WR
Hand-
umgehung
Handumgehungspfad
EUE
Netzeingangs-
sicherungs-
automat
Netz
Schematische
Darstellung
Gesicherte
Schiene:
Verbraucher
Energiefluss bei
vorhandenem Netz
Energiefluss bei vorhandenem Netz Power circuit with mains supply
Handumgehungspfad Manual bypass path
Netz Mains
GR REC
EUE SBS
WR INV
Netzeingangssicherungsautomat Mains input miniature circuit breaker
Schematische Darstellung Schematic diagram
Lade GR Load REC
Batterie Battery
Handumgehung Manual bypass
Gesicherte Schiene Secured busbar
Verbraucher Load