Filter
Top Products
Supported Traps
OmniSwitch 6800/6850/9000—Release 6.1.3.R01 page 39
26 stpNewRoot all Sent by a bridge that became the new
root of the spanning tree.
27 stpRootPortChange all A root port has changed for a span-
ning tree bridge. The root port is the
port that offers the lowest cost path
from this bridge to the root bridge.
28 mirrorConfigError all The mirroring configuration failed on
an NI. This trap is sent when any NI
fails to configure mirroring. Due to
this error, port mirroring session will
be terminated.
29 mirrorUnlikeNi all The mirroring configuration is deleted
due to the swapping of different NI
board type. The Port Mirroring ses-
sion which was active on a slot cannot
continue with the insertion of differ-
ent NI type in the same slot.
30 slPCAMStatusTrap all The trap status of the Layer 2 pesudo-
CAM for this NI.
31 unused —
32 unused —
33 slbTrapOperStatus — A change occurred in the operational
status of the server load balancing
entity.
34 ifMauJabberTrap all This trap is sent whenever a managed
interface MAU enters the jabber state.
35 sessionAuthenticationTrap all An authentication failure trap is sent
each time a user authentication is
refused.
36 trapAbsorptionTrap all The absorption trap is sent when a
trap has been absorbed at least once.
37 alaStackMgrDuplicateSlotTrap — Two or more slots claim to have the
same slot number.
38 alaStackMgrNeighborChangeTrap — Indicates whether or not the stack is in
loop.
39 alaStackMgrRoleChangeTrap — Indicates that a new primary or sec-
ondary stack is elected.
40 lpsViolationTrap all A Learned Port Security (LPS) viola-
tion has occurred.
41 alaDoSTrap all Indicates that the sending agent has
received a Denial of Service (DoS)
attack.
42 gmBindRuleViolation all Occurs whenever a binding rule
which has been configured gets vio-
lated.
43 unused —
No. Trap Name Platforms Description