Filter
Top Products
Features in 281-01 22
Version 281-02
C613-10482-00 REV B
Level 3
CR00013407
EPSR 2 The switch correctly accepted a changed ring flap time (the commands create or
set epsr ringflaptime). However, if the command create config was used to
save the configuration and the switch used that configuration after a reboot,
EPSR failed.
This issue has been resolved.
-------YY-
CR00013529
PIMv6 2 When the router or switch used PIM for multicast routing, and an IPv6 multicast
client joined a group, then left it, then attempted to rejoin it, sometimes the
attempt to rejoin was not successful.
This issue has been resolved.
YYYYY- - YYY
CR Module Level Description
AR400
AR7x5
AR750S / AR770S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948 / x900-48
AT-9900
AT-9800
CR00008766
TTY 3 Editing a text file that consisted of a very large number of lines (approaching or
exceeding 30,000 lines) caused the router or switch to reboot.
This issue has been resolved.
Y- Y- - - - YY-
CR00011444
Asyn 3 If information was sent to a console (asyn) port that had no cable plugged into
it, excessive CPU usage occurred.
This issue has been resolved.
YYYYYYYYYY
CR Module Level Description
AR400
AR7x5
AR750S / AR770S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948 / x900-48
AT-9900
AT-9800