Filter
Top Products
Features in 281-02 8
Version 281-02
C613-10482-00 REV B
CR00013415
Firewall 3 When an RTSP media stream, using TCP as the transport protocol, was passing
through the firewall, then the session could stall if some packets were
retransmitted with different sequence numbers to the original transmission.
This issue has been resolved.
Y
-Y- --- - - -
CR00013473
CR00013516
DVMRP 3 Values for some DVMRP settings (including ttlthreshold and metric) were not
saved in the configuration file or output resulting from the commands create
config and show config dynamic. If the router or switch rebooted, the values
were not applied.
This issue has been resolved.
Y
-Y- --- - - -
CR00013525
Stack 3 Different versions of the management stacking feature are not compatible with
each other, which means that AT-9924Ts or x900-24XT series switches can only
be stacked with other AT-9924Ts or x900-24XT switches.
This software version includes checks to prevent incompatible software from
being stacked.
-
--- -Y- - - -
CR00013547
VLAN 3 When DHCP snooping was enabled on the router or switch, performing a walk
of the MIB variables in that router or switch could result in incorrect termination
of the walk. This was because certain SNMP packets were incorrectly interpreted
as DHCP packets.
This issue has been resolved.
-
--- -Y- - - -
CR00013588
ATM 3 At low SHDSL bitrates, the EOC channel exhibited many spurious CRC errors.
This issue has been resolved.
Y --- --- - - -
CR00013672
ATM 3 An SNMP Walk of the ATM MIB would fail to complete properly, as it would not
advance through the channel list.
This issue has been resolved.
Y --- --- - - -
CR Module Level Description
AR400
AR7x5
AR750S / AR770S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948 / x900-48
AT-9900
AT-9800