Filter
Top Products
Features in 281-01 29
Version 281-02
C613-10482-00 REV B
CR00012916
L2TP 4 When the router or switch was configured as an LNS and received an incoming
L2TP call that was associated with a disabled PPP interface, it produced an
incorrect log message.
This issue has been resolved.
YYYYY- - YYY
CR00012946
Log 4 When a user entered the command show log receive=ipadd, information
about all IP addresses was displayed unless the user also entered the mask
parameter.
This issue has been resolved. Specifying an IP address without a mask now limits
the display to information about that IP address.
YYYYYYYYYY
CR00013086
IPv6 4 When the router or switch was running MLD and sent an MLD query packet, it
incremented the OutEchos counter instead of the OutGroupMembQueries
counter.
This issue has been resolved. To see the OutGroupMembQueries counter, enter
the command show ipv6 counter.
YYYYY- - YYY
CR00013115
IP Gateway 4 The “?” help description for the fragment parameter of the add ip interface
command was unclear.
This issue has been resolved. The query now states that the parameter “Decides
if Do Not Fragment is obeyed for IP packet larger than MTU”.
YYYYYYYYYY
CR Module Level Description
AR400
AR7x5
AR750S / AR770S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948 / x900-48
AT-9900
AT-9800