Filter
Top Products
Advanced Control Suite for the AT-2931SX Adapter User’s Guide
39
Note
The maximum number of members in a team is 8.
Note
When team configuration has been correctly performed, a Virtual
Team adapter driver is created for each configured team.
Note
If you disable a virtual team and later want to reenable it, you must
first disable and reenable all team members before you reenable the
virtual team.
Note
When you create Generic Trunking and Link Aggregation teams,
you cannot designate a Standby Member. Standby members work
only with Smart Load Balance and Failover and SLB (Auto-Fallback
Disable) types of teams.
Note
For an SLB (Auto-Fallback Disable) team, when you want to restore
traffic to the load balance members from the standby member, click
the Fallback button on the Team Properties Tab.
Note
Not all network devices made by other vendors are supported or
fully certified for teaming.
8. Configure the Team IP address if necessary.
If other network devices in your computer use TCP/IP bindings, the
TCP/IP Properties windows is displayed.
9. Configure the IP address and any other necessary TCP/IP
configuration for the team and click OK when finished.
Modifying a Team
After you have created a team, you can modify the team in the following
ways:
Change the type of team
Change the members assigned to the team