Filter
Top Products
Advanced Control Suite for the AT-2931SX Adapter User’s Guide
55
The AT-2931SX BASP configuration process, perform the following
procedure:
1. Copy a configuration script from the "/etc/basp/samples" directory to
the "/etc/basp" directory.
Note
The configuration script name must be prefixed with "team-".
2. Modify the following parameters of the configuration script:
(a) change the team type
(b) add or delete the physical network interfaces
(c) add or delete the virtual network interfaces
(d) assign IP address to each virtual network interface.
The syntax of the configuration script can be found in “AT-2931SX
BASP Configuration Scripts for Red Hat Distributions” on page 58 or in
the /etc/basp/sample/team-sample script file itself. Note that when
configuring Teaming, at least one Primary Adapter is required.
3. Manually start the team for the first time:
% /etc/init.d/basp start
Note
This step is only required for the first time installation. The team
configuration is started automatically on subsequent reboots.
Note
If not all of the virtual network interfaces are configured with an IP
address, an error message is displayed when starting the AT-
2931SX BASP team. If this happens, repeat step 2 to configure an
IP address for all of the virtual network interfaces.
Note
Forming multiple teams is possible by copying the sample files into "/
etc/basp/team-<name>" and modifying this file as described in the
sample file.
Note
To create more that one virtual interface (VLAN) for each team, refer
to the respective description section in the sample files.