Filter
Top Products
Chapter 4: Installing BACS on a Linux System
64
Uninstalling the
RPM Package
(Both Source and
Binary)
To uninstall RPM package, run:
% rpm -e baspsnmp-{version}.i386.rpm
and to reboot the system,
% reboot
Known Problems
The 802.3ad team member links disconnect and reconnect continuously
when connected to the HP2524 switch. This is a 3rd party issue. It is seen
only when configuring an 802.3ad team with more than 2 members on the
server and connecting to an HP2524 switch, with LACP enabled as
passive or active. The HP switch shows an LACP channel brought up
successfully with only 2 members. All other member's links disconnect
and reconnect. This issue does not occur with a Cisco Catalyst 6500.
Brcm-BSAPTrap-
MIB.txt
SNMP MIB file for BASP trap objects
release.txt this file
Table 7. SNMP Files (Continued)
Filename Description