Filter
Top Products
Advanced Control Suite for the AT-2931SX Adapter User’s Guide
51
Installing the BASP Source RPM Package for Red Hat and United
Linux
To install the AT-2931SX BASP RPM source package for Red Hat and
United Linux 1.x based distributions, perform the following procedure.
1. To install the RPM source package, run
% rpm -i basplnx-{version}.src.{arch}.rpm
2. Change directory to the RPM path and build the binary driver for
the kernel (use rpmbuild for Red Hat 8.0 or later)
% cd /usr/src/{redhat or packages}
% rpm -bb SPECS/basplnx.spec or rpmbuild -bb SPECS/
basplnx.spec
Note
Each Linux distribution has a unique RPM path.
3. Install the newly built package
% rpm -i RPMS/i386/basplnx-{version}.{arch}.rpm
The driver and other required files are installed automatically.
4. To load the driver
% insmod basp
5. To set up the teams, refer to “AT-2931SX BASP Configuration for Red
Hat and United Linux Distributions” on page 54.