Filter
Top Products
Advanced Control Suite for the AT-2931SX Adapter User’s Guide
63
7. The snmpget and snmpgetnext commands can be used to receive the
AT-2931SX BASP snmp objects such as:
% snmpget localhost public BASP-Config-MIB::btTeamNumber
% snmpgetnext localhost public BASP-Config-
MIB::btTeamNumber
AT-2931SX BASP SNMP objects are provided in the following text
files:
– BASP-Config-MIB.txt
– BASP-Statistics-MIB.txt
– Brcm-BSAPTrap-MIB.txt
Installing the
RPM Package
Complete the following steps to install AT-2931SX BASP SNMP agent
from the RPM package.
1. To install the RPM package, run:
% rpm -i baspsnmp-{version}.i386.rpm
The AT-2931SX BASP script and MIB files are installed. The
snmpd.conf configuration file is modified to add support for the AT-
2931SX BASP SNMP agent.
2. Follow steps 4 - 6 in the “Installing the TAR Archive” on page 62.
Note
The current RPM installation fails to append the additional directives
needed to the snmpd.conf file to support Basp objects. Therefore,
follow the instruction (3) in the Install - TAR archive to modify the
snmpd.conf file.
SNMP Files See Table 7 for a list of supported SNMP files.
Table 7. SNMP Files
Filename Description
genBaspTrap script monitoring the BASP trap events
getBaspInfo script to process SNMP get/getnext
inquiries
BASP-Config-MIB.txt SNMP MIB file for BASP configuration
objects
BASP-Statistics-
MIB.txt
SNMP MIB file for BASP statistics
objects