Filter
Top Products
Chapter 23: DHCP Snooping
298
Trusted and Untrusted Port Configuration
The following procedure describes how to configure the DHCP Snooping
trusted interfaces on the AT-GS950/10PS switch:
1. From the main menu on the left side of the page, select DHCP
Snooping.
The DHCP Snooping folder expands.
2. From the DHCP Snooping folder, select Trusted Interfaces.
A partial view of the AT-GS950/10PS Trusted Interfaces page is
displayed. See Figure 117.
Figure 117. AT-GS950/10PS Trusted Interfaces Page
3. From the Trust column, select one of the following choices from the
pull-down menu:
Disable: This parameter defines the port as untrusted for the
DHCP Snooping feature.
Enable: This parameter defines the port as trusted for the DHCP
Snooping feature.
4. Click Apply for the port.
The port is now configured for you selection.
See Figure 118 on page 299 for a partial view of this page.