Filter
Top Products
AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 165
System IP Address
Enter the IP address for the switch.
System Subnet Mask
Enter the subnet mask for the switch.
System Default Gateway
Enter the default gateway’s IP address.
DHCP Mode
For information about setting this parameter, refer to “Enabling and
Disabling the DHCP Client” on page 166.
3. Click Apply.
Note
Changing the IP address ends your management session. To
resume managing the device, enter the new IP address of the switch
in the web browser’s URL field, as shown in Figure 41 on page 158.