Filter
Top Products
AT-S79 Management Software User’s Guide
Section I: Using the Menus Interface 91
Modifying a VLAN
This procedure allows you to perform the following functions:
Change the name of a VLAN.
Add or remove tagged ports from a VLAN.
Before performing this procedure, note the following:
You cannot change the VID of a VLAN.
You cannot add an untagged port to a VLAN with this procedure. That
function requires changing a port’s VID value, as explained in
“Configuring the PVID of Untagged Ports” on page 87
You cannot remove an untagged port from a VLAN with this procedure.
To remove an untagged port from a VLAN, you must assign it as an
untagged member of another VLAN by changing its PVID, as
explained in “Configuring the PVID of Untagged Ports” on page 87.
To change the name of a VLAN or to add or remove tagged ports, perform
the following procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
The Advanced Switch Configuration Menu is shown in Figure 14 on
page 59.
2. From the Advanced Switch Configuration Menu, type V to select VLAN
Management.
The VLAN Management Menu is shown in Figure 20 on page 84.
3. Type O to select Config VLAN Member.
The following prompt is displayed:
Enter VLAN ID >
4. Type the number of the VLAN you want to modify and press Enter.
The Config VLAN Member menu is shown in Figure 22 on page 90.
5. To change the VLAN’s name, do the following:
a. Type C to select Change VLAN Name.
The following prompt is displayed:
Enter new VLAN name>