Filter
Top Products
AT-2973SX, AT-2973T, AT-2973T/4, and AT-VNC10S Adapters Installation and User’s Guide
161
uxdiag -fump
<ump_image>
Specifies the bin file to update UMP
firmware.
uxdiag -help Displays the Broadcom NetXtreme II
User Diagnostics, uxdiag, command
options.
uxdiag -I <iteration num> Specifies the number of iterations to
run on the selected tests.
uxdiag -idmatch Enables matching of VID, DID, SVID,
and SSID from the image file with
device IDs. Used only with -fnvm
<raw_image>.
uxdiag -log <file> Logs the test results to a specified log
file.
uxdiag -mba <1/0> Enables/disables Multiple Boot Agent
(MBA) protocol where:
1 = Enable
0 = Disable
uxdiag -mbap <n> Sets the MBA boot protocol, where:
0 = PXE
1 = RPL
2 = BOOTP
uxdiag -mbas <n> Sets the MBA/PXE speed, where:
0 = Auto
1 = 10H
2 = 10F
3 = 100H
4 = 100F
6 = 1000F
uxdiag -mbav <1|0> Enables/disables MBA VLAN, where:
1 = Enable
0 = Disable
uxdiag -mbavval <n> Sets MBA VLAN (<65536).
uxdiag -mfw <1/0> Enables/disables management
firmware, where:
1 = Enable
0 = Disable
uxdiag -t <groups/tests> Disables certain groups or tests.
uxdiag -T <groups/tests> Enables certain groups or tests.
Table 16. uxdiag Command Options (Continued)
Command Options Description