Filter
Top Products
Chapter 5: Installing the NDIS2 Driver Software
64
NodeAddress. Specifies the network address used by the network
adapter. If a multicast address or a broadcast address is specified, the
adapter uses the default MAC address.
FixCheckSumOff. Turns off the driver's workaround for the TCP/IP
stack to recognize the 1s complemented version of the checksum.
AcceptAllMC. Informs the driver to deliver all multicast packets to the
upper protocol.
See below for an example of the keywords:
[BXND20X]
DriverName = "BXND20X$"
BusNum = 3
DevNum = 14
PortNum = 2
LineSpeed = 1000
Duplex = Full
NodeAddress = 001020304050