Filter
Top Products
AT-x210-9GT, AT-x210-16GT, and AT-x210-24GT Switches Installation Guide
7
LEDs Here is a brief description of the port LEDs:
Power LED/Fault/Standby LEDs; refer to “POWER/FAULT/
STANDBY LEDs” on page 13.
Speed and link/activity LEDs for the twisted pair ports; see
“10Base-T/100Base-TX/1000 Base-T Link Activity LEDs” on
page 15.
Link/activity LEDs for the SFP slots; see “SFP LEDs” on page 17.
Installation
Options
The AT-x210-9GT switch can be installed in the following way:
Mounted on a Desk or tabletop
The AT-x210-16GT and AT-x210-24GT switches can be installed in the
following ways:
Rack mounted in a19-inch equipment rack
Mounted on a Desk or tabletop
Wall mounted
Power
Conservation
The AT-x210-9GT, AT-x210-16GT, and AT-x210-24GT switches have the
following power conservation features:
High-efficiency power supply
Power scaling based on traffic loads on ports operating at 1000
Mbps (Port power scaling not available at 10 or 100 Mbps)
Power shutdown on unused ports
MAC Address
Table
Here are the basic features of the MAC address table:
Storage capacity up to 8KB MAC address entries
Automatic learning and aging