Filter
Top Products
Getting Started 15
Rapier Switch Software Release 2.2.1
C613-02013-00 Rev A
Figure 2: Rapier 24 Welcome page
■
Save this page as a bookmark in your web browser, so that you can easily
find it again.
Navigating
While using the Rapier GUI, use the buttons on the pages to navigate, not the
browser’s Back and Forward buttons, to ensure that configuration information
is stored correctly.
The GUI is made up of Configuration pages, Monitoring pages and a
Troubleshooting page. Click on a menu item on the left to select the
Configuration, Monitoring or Troubleshooting pages.
Using help mode
Clicking Help opens help mode pages which show any help text available for
the current configuration page. Navigate through help mode pages in the same
way as navigating through the configuration pages. To return to the
configuration page corresponding to your current help mode page, click Exit
Help.
Configuring
Once in the Configuration page, select the type of configuration you want to
change. Tabs on the resulting pages allow you to modify a range of features.
Ports affected by the configuration are selected by clicking on a port in the port
map. To apply configuration changes selected or entered on a page, click
Apply. This saves the configuration in the switch’s memory, so that it affects its
current functioning, and updates the configuration file in FLASH memory
(“Configuration Scripts” on page 19).
To restore default settings on a configuration page, click Defaults to show the
defaults, then click Apply to apply the default settings shown.