Filter
Top Products
18 SHOW IGMPSNOOPING ROUTERADDRESS Patch Release Note
Patch 86261-04 for Software Release 2.6.1
C613-10386-00 REV D
Rapier Series switches with a DC power supply did not recognise the DC
power supply. This issue has been resolved.
Features in 86261-01
Patch file details are listed in Table 5:
Patch 86261-01 includes the following enhancements and resolved issues:
When using MVR on a Rapier 48 or Rapier 48i, multicast packets were not
forwarded correctly between ports 1-24 and 25-48. This issue has been
resolved.
OSPF disabled RIP unless RIP was activated using the SET OSPF RIP
command. This issue has been resolved.
ISAKMP did not support the IPSec message option
ID_IPV6_ADDR_SUBNET (RFC 2407, 4.6.2.7). ISAKMP was using the
ID_IPV6_ADDR (RFC 2407, 4.6.2.6) option instead. This issue has been
resolved.
When BGP imported routes from IP with the ADD BGP IMPORT command,
and there were multiple import choices, the best IP route was not always
imported. This issue has been resolved.
The MTU value for IPv6 PPP interfaces was always set to 1280 bytes. This
MTU value is now correctly set to 1500 bytes, and 1492 bytes for PPP over
Ethernet (PPPoE).
OSPF sometimes chose routes with an infinite metric over routes with a
finite metric when selecting the best local route. This issue has been
resolved.
PCR: 31137 Module: CORE Level: 4
Table 5: Patch file details for Patch 86261-01.
Base Software Release File
86-261.rez
Patch Release Date
2-Oct-2003
Compressed Patch File Name
86261-01.paz
Compressed Patch File Size
94120 bytes
PCR: 03268 Module: SWI Level: 1
PCR: 03524 Module: OSPF, IPG Level: 2
PCR: 03798 Module: IKMP Level: 3
PCR: 03826 Module: BGP Level: 2
PCR: 03828 Module: IPV6 Level: 2
PCR: 03836 Module: OSPF Level: 2